希望增加UPS设备类型支持：科华YTA800

han1997

下面在nas上安装 nut 后使用 nut-scanner 获取到的信息：

root@fnOS:~# nut-scanner
Scanning USB bus.
No start IP, skipping NUT bus (old connect method)
Scanning NUT bus (avahi method).
[nutdev1]
        driver = "nutdrv_qx"
        port = "auto"
        vendorid = "0665"
        productid = "5161"
        product = "USB to Serial"
        vendor = "INNO TECH"
        bus = "001"
root@fnOS:~#

下面是配置完 nut 后输出的状态信息：

root@fnOS:~# upsc ups@localhost
Init SSL without certificate database
battery.charge: 100
battery.voltage: 13.50
battery.voltage.high: 13.00
battery.voltage.low: 10.40
battery.voltage.nominal: 12.0
device.type: ups
driver.name: nutdrv_qx
driver.parameter.bus: 001
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: USB to Serial
driver.parameter.productid: 5161
driver.parameter.synchronous: auto
driver.parameter.vendor: INNO TECH
driver.parameter.vendorid: 0665
driver.version: 2.8.0
driver.version.data: Voltronic-QS 0.07
driver.version.internal: 0.32
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.voltage: 234.8
input.voltage.fault: 234.8
output.current.nominal: 3.0
output.frequency: 50.0
output.frequency.nominal: 50
output.voltage: 234.8
output.voltage.nominal: 220
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware.aux: PM-V
ups.load: 22
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

飞牛产品同学

感谢反馈，这个我们记录一下推进评估

遇到好运

我就是科华YTA800,一天5.6次提醒UPS断开连接,几秒钟后又连接成功