请问QNAP TS-453 Pro安装飞牛如何编译LCD 按键等驱动

wrzone

经过重重难关搞定：1、关机自动重启，2、CoolerControl控制风扇

现在要解决的问题：驱动面板LCD屏幕、LCD旁边的按键。

网上有提供：https://github.com/zopieux/qnapctl、https://gist.github.com/zopieux/0b38fe1c3cd49039c98d5612ca84a045

苦于不懂编译，小白求提供编译食用方法，感谢！

最好贴上详细步骤。

wrzone

https://github.com/jdupl/QnapFreeLCD

找到一个可以在SSH下执行的ksh脚本，但是依赖SSH窗口。Ctrl+c中断，或者关闭SSH窗口，LCD屏幕就黑屏了。也无法用 systemctl 设置开机自动启动

贴上启动失败日志：

sudo systemctl status my-script.service
× my-script.service - Autostart ksh Script as Root
Loaded: loaded (/etc/systemd/system/my-script.service; enabled; preset: enabled)
Active: failed (Result: signal) since Fri 2025-06-20 20:49:27 CST; 5min ago
Duration: 84ms
Process: 1159 ExecStart=/QnapFreeLCD/lcd-control.ksh (code=killed, signal=KILL)
Main PID: 1159 (code=killed, signal=KILL)
CPU: 53ms

Jun 20 20:49:27 QNAP systemd[1]: my-script.service: Scheduled restart **, restart counter is at 5.
Jun 20 20:49:27 QNAP systemd[1]: Stopped my-script.service - Autostart ksh Script as Root.
Jun 20 20:49:27 QNAP systemd[1]: my-script.service: Start request repeated too quickly.
Jun 20 20:49:27 QNAP systemd[1]: my-script.service: Failed with result 'signal'.
Jun 20 20:49:27 QNAP systemd[1]: Failed to start my-script.service - Autostart ksh Script as Root.