1060不能硬件编码

zglnas

使用1060 3G显卡，提示不能编码，已经安装应用中心的英伟达驱动，请问如何解决？

lalala

能贴一下 lspci的信息吗?

zglnas

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation C232 Chipset LPC/eSPI Controller (rev 31)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-LM (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 3GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
03:00.0 Non-Volatile memory controller: Intel Corporation SSD Pro 7600p/760p/E 6100p Series (rev 03)

zglnas

我也使用apt装过，也不行

paladinasd

会不会是显卡阉割了编码单元？只能转码解码？貌似16系没有阉割，再这以下的都有阉割，我个人试过1070和DG1作对比，实际效果DG1比1070强点，功耗还低

九济堂

https://blog.csdn.net/pfysw/article/details/108760103

caijian0834

同求解决办法

takeko

我的1060 6G刚测试可以，重启后用电影测试就可以了