牛牛，同上，升级后 AMD 5825U 依旧无法调用GPU进行相册的Ai加速，后续有无适配计划？而且，cpu温度咋那么高？动不动85，我在win11下都没这么高啊……

APU 5600GT 的核显无法被相册的ai模型调用 智能识别还在用cpu跑。

申请了先锋团 快通过一下

chogchongchogn

什么时候可以吧我的AMDCPU 支持下

AMD YES

系统盘不够20G了，能不能单独开放AMD ROCm驱动下载吖？

我的 3200G cpu 内置的核显在相册里面不支持AI硬件加速吗？ 2个应用程序都装上了

正式版什么时候推送啊

AMD 5825u在相册里显卡显示正确，但是智能识别等情况下GPU并没有启用，依然是调用的CPU。另外，在播放4k/8k视频使用转码时，GPU并不是一直工作，转码一下后就停止，然后再开始转码。播放过程就会卡顿。同样的视频使用N100转码没有问题。

申请几天了，还没收到更新

这种配置还有机会能用上amd的驱动么

我的amd yes呢 哈哈哈哈哈哈

牛

intel750的核显 和rx6500xt ai硬件加速没什么区别。。十几分钟了，人脸识别

两百多，，我二十多万的相片。。以前一两天就好，现在看得半个月啊

社区ID在哪看啊？

Apache2 Debian Default Page

It works!

This is the default welcome page used to test the correct operation of the Apache2 server after installation on Debian systems. If you can read this page, it means that the Apache HTTP server installed at this site is working properly. You should replace this file (located at /var/www/html/index.html) before continuing to operate your HTTP server.

If you are a normal user of this web site and don't know what this page is about, this probably means that the site is currently unavailable due to maintenance. If the problem persists, please contact the site's administrator.

Configuration Overview

Debian's Apache2 default configuration is different from the upstream default configuration, and split into several files optimized for interaction with Debian tools. The configuration system is fully documented in /usr/share/doc/apache2/README.Debian.gz. Refer to this for the full documentation. Documentation for the web server itself can be found by accessing the manual if the apache2-doc package was installed on this server.

The configuration layout for an Apache2 web server installation on Debian systems is as follows:

/etc/apache2/
|-- apache2.conf
|       `--  ports.conf
|-- mods-enabled
|       |-- *.load
|       `-- *.conf
|-- conf-enabled
|       `-- *.conf
|-- sites-enabled
|       `-- *.conf
code

/etc/apache2/
|-- apache2.conf
|       `--  ports.conf
|-- mods-enabled
|       |-- *.load
|       `-- *.conf
|-- conf-enabled
|       `-- *.conf
|-- sites-enabled
|       `-- *.conf
        

• apache2.conf is the main configuration file. It puts the pieces together by including all remaining configuration files when starting up the web server.
• ports.conf is always included from the main configuration file. It is used to determine the listening ports for incoming connections, and this file can be customized anytime.
• Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ directories contain particular configuration snippets which manage modules, global configuration fragments, or virtual host configurations, respectively.
• They are activated by symlinking available configuration files from their respective *-available/ counterparts. These should be managed by using our helpers a2enmod, a2dismod, a2ensite, a2dissite, and a2enconf, a2disconf . See their respective man pages for detailed information.
• The binary is called apache2. Due to the use of environment variables, in the default configuration, apache2 needs to be started/stopped with /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not work with the default configuration.