笔记本无法正常关闭，重启

Wingkit

glmos-code-explain

在web端点击重启或关机，除了风扇一直转，其他该灭的就灭了，100%出现。

笔记本为宏基4750G i3 GT520M,12g内存+1TSSD+256G SSD+usb 1T HHD+usb 2T HHD

接上屏幕，显示

[71380.532949] libvirt guests.sh[1466439]: Can't connect to default.Skipping

[FAILED] Failed unmounting vol1.mount- /vol1.

[FAILED] Failed unmounting vol2.mount- /vol2.

[FAILED] Failed unmounting vol2.mount- /vol3.

---

无法上传图片，论坛报

413 Request Entity Too Large

memory_clear

sudo journalctl -u libvirtd -n 100 看看日志

Wingkit

memory_clear 发表于 2025-4-18 13:52
sudo journalctl -u libvirtd -n 100 看看日志

Apr 18 13:24:01 Nas systemd[1]: Starting libvirtd.service - Virtualization daemon...
Apr 18 13:24:01 Nas systemd[1]: Started libvirtd.service - Virtualization daemon.
Apr 18 13:26:01 Nas systemd[1]: libvirtd.service: Deactivated successfully.

memory_clear

这个服务日志正常，那应该就是无法卸载挂载的盘导致的。有可能是又进程或者服务正在读写这个盘，也有可能文件系统错误。

Wingkit

memory_clear 发表于 2025-4-18 16:23
这个服务日志正常，那应该就是无法卸载挂载的盘导致的。有可能是又进程或者服务正在读写这个盘，也有可能文 ...

我试过，就保留一个系统盘，其他盘都没接入，一样是无法正常关机，重启的，只能强制关机再开机

memory_clear

日志里面是三个盘都不能卸载。

Wingkit

memory_clear 发表于 2025-4-18 16:31
日志里面是三个盘都不能卸载。

我知道，所以才试试将这三个盘都不接入，然后开机，进系统后，再关机，一样是无法正常关机的，但没报Failed unmounting vol1.mount- /vol1. 。只有出现libvirt guests.sh[1466439]: Can't connect to default.Skipping

过了一阵子显示器自动关掉，黑屏，硬盘灯，键盘灯，网口灯全部灭掉。CPU风扇一直转，电源灯亮

memory_clear

sudo journalctl -b -1 查看上次关机日志瞅瞅

Wingkit

memory_clear 发表于 2025-4-18 16:51
sudo journalctl -b -1 查看上次关机日志瞅瞅

Specifying boot ID or boot offset has no effect, no persistent journal was found.

Wingkit

glmos-code-explain

我执行了sudo journalctl -b，将日志导了出来，不知有没有帮助

https://s.fnnas.net/s/5acffb1cf58c45b596

Wingkit

glmos-code-explain

Apr 18 13:23:58 Nas kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230628/utaddress-204)
Apr 18 13:23:58 Nas kernel: ACPI: OSL: Resource conflict; ACPI support missing from driver?
Apr 18 13:23:58 Nas kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
Apr 18 13:23:58 Nas kernel: ACPI: OSL: Resource conflict; ACPI support missing from driver?
Apr 18 13:23:58 Nas kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
Apr 18 13:23:58 Nas kernel: ACPI: OSL: Resource conflict; ACPI support missing from driver?
Apr 18 13:23:58 Nas kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230628/utaddress-204)
Apr 18 13:23:58 Nas kernel: ACPI: OSL: Resource conflict; ACPI support missing from driver?

---

Apr 18 13:23:58 Nas kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window

---

Apr 18 13:24:01 Nas nut-server[999]: Warning: no UPS definitions in ups.conf
Apr 18 13:24:01 Nas nut-server[999]: Fatal error: at least one UPS must be defined in ups.conf
Apr 18 13:24:01 Nas nut-server[999]: Network UPS Tools upsd 2.8.0
Apr 18 13:24:01 Nas upsd[999]: Warning: no UPS definitions in ups.conf
Apr 18 13:24:01 Nas systemd[1]: nut-monitor.service: Failed with result 'exit-code'.
Apr 18 13:24:01 Nas upsd[999]: Fatal error: at least one UPS must be defined in ups.conf
Apr 18 13:24:01 Nas systemd[1]: nut-server.service: Main process exited, code=exited, status=1/FAILURE
Apr 18 13:24:01 Nas systemd[1]: nut-server.service: Failed with result 'exit-code'.

我没打开ups的

memory_clear

报错种有ACPI资源冲突。尝试在bios种关闭ACPI功能，如 ACPI S3/S4 Sleep States。如果没有这个设置的话，在启动GRUB启动配置中添加参数缓解冲突。
# 编辑grub配置
sudo nano /etc/default/grub
# 修改GRUB_CMDLINE_LINUX行，添加：
GRUB_CMDLINE_LINUX="acpi_enforce_resources=lax"
# 更新grub并重启
sudo update-grub && reboot

Wingkit

memory_clear 发表于 2025-4-18 18:31
报错种有ACPI资源冲突。尝试在bios种关闭ACPI功能，如 ACPI S3/S4 Sleep States。如果没有这个设置的话，在 ...

GRUB_DEFAULT="gnulinux-6.6.38-trim-advanced-aa7a9b16-34eb-4fa8-a819-8f5c520ef05b"
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet i915.force_probe=7d55"
#GRUB_CMDLINE_LINUX="modprobe.blacklist=pcspkr"
GRUB_CMDLINE_LINUX="acpi_enforce_resources=lax"

修改成这样，关机还是一样的。CPU风扇不关。刚把飞牛重装了，然后就一个盘，改grub。没效果

spadger

关注该问题，今天遇到同样的问题，插上显示器看了下，提示完全一样。日志提示是卸载/vol1失败，实际/vol1是一块1TB的HDD。系统最新的0.9.2。

walle

关注了，老旧笔记本同样的问题，只是没插上显示器看过什么报错。