marvell aqc113这鸟网卡真是糟心

jzhou2012

升级1.1.20后，aqc113就不正常了，用iperf3打流，nas接收数据只有2.0Mb,发送数据倒是正常，如下面那个，剩下几秒中全是0

iperf3.exe -c 192.168.30.8
Connecting to host 192.168.30.8, port 5201
[ 5] local 192.168.10.9 port 11808 connected to 192.168.30.8 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 256 KBytes 2.10 Mbits/sec
[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 3.00-4.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec

---

[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 256 KBytes 210 Kbits/sec sender
[ 5] 0.00-10.00 sec 4.28 KBytes 3.50 Kbits/sec receiver

就像这样，只有关闭网卡tso就恢复正常了，哎不知道这鸟网卡搞啥呢

关闭命令

sudo ethtool -K enp4s0 tso off

有没有可能在ui界面能够像windows网卡驱动那样可以调节各种负载?