OES从1.1.20升级到1.1.31后网卡变为百兆

13396361903

系统版本：ARM

设备环境：WXY OES

BUG现象：OES从1.1.20升级到1.1.31后网卡变为百兆

出现频率：升级后出现

联系方式：（可提供手机号，或所在粉丝群与昵称，例如：1群-路人甲）

日志文件：

root@fnnas:~# ethtool end0
Settings for end0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: on
master-slave cfg: preferred slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
Supports Wake-on: ug
Wake-on: d
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes

飞牛运营同学

感谢反馈！从你提供的 ethtool 信息看，设备网卡本身支持 1000Mb/s，但对端当前只协商到了 10/100Mb/s，可能与网线、交换机/路由器端口协商、驱动或升级后的链路协商状态有关。建议先更换六类/超五类网线、换交换机/路由器千兆口，并重启 NAS 与上级网络设备后再确认。