用reboot重启系统后有个r5阵列一直无法挂载，查询dmesg后发现好像是两块硬盘有问题，一直在报io error，但是我检查了一下smart好像又是正常的，现在不知道问题是出在硬件还是软件，求助一下，数据有点重要，求助一下各位大佬
dmesg
[ 0.000000] Linux version 6.12.18-trim (root@MiuMiuPC) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #5 SMP PREEMPT_DYNAMIC Thu Mar 27 10:30:00 CST 2025
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.18-trim root=UUID=3ff1ebb2-e799-48ed-abf4-70f1de4efac6 ro modprobe.blacklist=pcspkr quiet i915.force_probe=7d55
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb12bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb12c000-0x00000000bb15afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb15b000-0x00000000bcc6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bcc6d000-0x00000000bcc6dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcc6e000-0x00000000bcc97fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcc98000-0x00000000c2759fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c275a000-0x00000000c3e39fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c3e3a000-0x00000000c3e5cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c3e5d000-0x00000000c4058fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c4059000-0x00000000c4791fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c4792000-0x00000000c52fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c52ff000-0x00000000c52fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c5300000-0x00000000c7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000236ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/H110M-K, BIOS 2003 09/19/2016
[ 0.000000] DMI: Memory slots populated: 1/2
[ 0.000000] tsc: Detected 3700.000 MHz processor
[ 0.000000] tsc: Detected 3699.850 MHz TSC
[ 0.000653] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000656] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000663] last_pfn = 0x237000 max_arch_pfn = 0x400000000
[ 0.000666] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000668] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000891] last_pfn = 0xc5300 max_arch_pfn = 0x400000000
[ 0.006497] found SMP MP-table at [mem 0x000fcbf0-0x000fcbff]
[ 0.006507] Using GB pages for direct mapping
[ 0.007277] RAMDISK: [mem 0x2f01b000-0x33804fff]
[ 0.007280] ACPI: Early table checksum verification disabled
[ 0.007283] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.007286] ACPI: XSDT 0x00000000BB12C0A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007290] ACPI: FACP 0x00000000BB14F320 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.007294] ACPI: DSDT 0x00000000BB12C1E8 023134 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.007297] ACPI: FACS 0x00000000C4791F80 000040
[ 0.007299] ACPI: APIC 0x00000000BB14F430 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.007301] ACPI: FPDT 0x00000000BB14F4B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007303] ACPI: FIDT 0x00000000BB14F500 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.007305] ACPI: MCFG 0x00000000BB14F5A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.007307] ACPI: HPET 0x00000000BB14F5E0 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.007309] ACPI: SSDT 0x00000000BB14F618 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.007311] ACPI: LPIT 0x00000000BB14F988 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.007313] ACPI: SSDT 0x00000000BB14FA20 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.007315] ACPI: SSDT 0x00000000BB14FC68 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.007317] ACPI: SSDT 0x00000000BB152818 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.007319] ACPI: SSDT 0x00000000BB153400 0004A3 (v02 INTEL zpodd 00001000 INTL 20120913)
[ 0.007322] ACPI: DBGP 0x00000000BB1538A8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.007324] ACPI: DBG2 0x00000000BB1538E0 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.007326] ACPI: SSDT 0x00000000BB153938 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.007328] ACPI: SSDT 0x00000000BB154040 005359 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.007330] ACPI: UEFI 0x00000000BB1593A0 000042 (v01 00000000 00000000)
[ 0.007332] ACPI: SSDT 0x00000000BB1593E8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.007334] ACPI: Reserving FACP table memory at [mem 0xbb14f320-0xbb14f42b]
[ 0.007335] ACPI: Reserving DSDT table memory at [mem 0xbb12c1e8-0xbb14f31b]
[ 0.007336] ACPI: Reserving FACS table memory at [mem 0xc4791f80-0xc4791fbf]
[ 0.007336] ACPI: Reserving APIC table memory at [mem 0xbb14f430-0xbb14f4b3]
[ 0.007337] ACPI: Reserving FPDT table memory at [mem 0xbb14f4b8-0xbb14f4fb]
[ 0.007338] ACPI: Reserving FIDT table memory at [mem 0xbb14f500-0xbb14f59b]
[ 0.007338] ACPI: Reserving MCFG table memory at [mem 0xbb14f5a0-0xbb14f5db]
[ 0.007339] ACPI: Reserving HPET table memory at [mem 0xbb14f5e0-0xbb14f617]
[ 0.007339] ACPI: Reserving SSDT table memory at [mem 0xbb14f618-0xbb14f984]
[ 0.007340] ACPI: Reserving LPIT table memory at [mem 0xbb14f988-0xbb14fa1b]
[ 0.007341] ACPI: Reserving SSDT table memory at [mem 0xbb14fa20-0xbb14fc67]
[ 0.007341] ACPI: Reserving SSDT table memory at [mem 0xbb14fc68-0xbb152815]
[ 0.007342] ACPI: Reserving SSDT table memory at [mem 0xbb152818-0xbb1533fa]
[ 0.007342] ACPI: Reserving SSDT table memory at [mem 0xbb153400-0xbb1538a2]
[ 0.007343] ACPI: Reserving DBGP table memory at [mem 0xbb1538a8-0xbb1538db]
[ 0.007343] ACPI: Reserving DBG2 table memory at [mem 0xbb1538e0-0xbb153933]
[ 0.007344] ACPI: Reserving SSDT table memory at [mem 0xbb153938-0xbb15403c]
[ 0.007345] ACPI: Reserving SSDT table memory at [mem 0xbb154040-0xbb159398]
[ 0.007345] ACPI: Reserving UEFI table memory at [mem 0xbb1593a0-0xbb1593e1]
[ 0.007346] ACPI: Reserving SSDT table memory at [mem 0xbb1593e8-0xbb15a25a]
[ 0.007456] No NUMA configuration found
[ 0.007456] Faking a node at [mem 0x0000000000000000-0x0000000236ffffff]
[ 0.007464] NODE_DATA(0) allocated [mem 0x236fd3dc0-0x236ffdfff]
[ 0.007597] Zone ranges:
[ 0.007597] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007599] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007600] Normal [mem 0x0000000100000000-0x0000000236ffffff]
[ 0.007601] Device empty
[ 0.007602] Movable zone start for each node
[ 0.007604] Early memory node ranges
[ 0.007604] node 0: [mem 0x0000000000001000-0x0000000000099fff]
[ 0.007605] node 0: [mem 0x0000000000100000-0x00000000bb12bfff]
[ 0.007606] node 0: [mem 0x00000000bb15b000-0x00000000bcc6cfff]
[ 0.007607] node 0: [mem 0x00000000bcc98000-0x00000000c2759fff]
[ 0.007607] node 0: [mem 0x00000000c3e5d000-0x00000000c4058fff]
[ 0.007608] node 0: [mem 0x00000000c52ff000-0x00000000c52fffff]
[ 0.007608] node 0: [mem 0x0000000100000000-0x0000000236ffffff]
[ 0.007610] Initmem setup node 0 [mem 0x0000000000001000-0x0000000236ffffff]
[ 0.007613] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007640] On node 0, zone DMA: 102 pages in unavailable ranges
[ 0.015453] On node 0, zone DMA32: 47 pages in unavailable ranges
[ 0.015691] On node 0, zone DMA32: 43 pages in unavailable ranges
[ 0.015766] On node 0, zone DMA32: 5891 pages in unavailable ranges
[ 0.015822] On node 0, zone DMA32: 4774 pages in unavailable ranges
[ 0.016352] On node 0, zone Normal: 11520 pages in unavailable ranges
[ 0.016400] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.016407] Reserving Intel graphics memory at [mem 0xc6000000-0xc7ffffff]
[ 0.016567] ACPI: PM-Timer IO Port: 0x1808
[ 0.016572] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.016574] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.016574] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.016575] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.016600] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.016602] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.016604] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.016607] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.016608] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.016610] TSC deadline timer available
[ 0.016615] CPU topo: Max. logical packages: 1
[ 0.016615] CPU topo: Max. logical dies: 1
[ 0.016616] CPU topo: Max. dies per package: 1
[ 0.016620] CPU topo: Max. threads per core: 2
[ 0.016620] CPU topo: Num. cores per package: 2
[ 0.016621] CPU topo: Num. threads per package: 4
[ 0.016621] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.016634] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.016635] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[ 0.016636] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[ 0.016637] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.016637] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.016638] PM: hibernation: Registered nosave memory: [mem 0xbb12c000-0xbb15afff]
[ 0.016639] PM: hibernation: Registered nosave memory: [mem 0xbcc6d000-0xbcc6dfff]
[ 0.016640] PM: hibernation: Registered nosave memory: [mem 0xbcc6e000-0xbcc97fff]
[ 0.016641] PM: hibernation: Registered nosave memory: [mem 0xc275a000-0xc3e39fff]
[ 0.016642] PM: hibernation: Registered nosave memory: [mem 0xc3e3a000-0xc3e5cfff]
[ 0.016643] PM: hibernation: Registered nosave memory: [mem 0xc4059000-0xc4791fff]
[ 0.016643] PM: hibernation: Registered nosave memory: [mem 0xc4792000-0xc52fefff]
[ 0.016645] PM: hibernation: Registered nosave memory: [mem 0xc5300000-0xc7ffffff]
[ 0.016645] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
[ 0.016646] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.016646] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[ 0.016647] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.016647] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.016648] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.016648] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.016649] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.016649] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.016650] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.016651] [mem 0xc8000000-0xf7ffffff] available for PCI devices
[ 0.016652] Booting paravirtualized kernel on bare hardware
[ 0.016654] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.020376] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.020816] percpu: Embedded 61 pages/cpu s210072 r8192 d31592 u524288
[ 0.020822] pcpu-alloc: s210072 r8192 d31592 u524288 alloc=1*2097152
[ 0.020823] pcpu-alloc: [0] 0 1 2 3
[ 0.020838] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.18-trim root=UUID=3ff1ebb2-e799-48ed-abf4-70f1de4efac6 ro modprobe.blacklist=pcspkr quiet i915.force_probe=7d55
[ 0.020892] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.18-trim", will be passed to user space.
[ 0.020923] random: crng init done
[ 0.022226] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.022892] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.022947] Fallback order for Node 0: 0
[ 0.022950] Built 1 zonelists, mobility grouping on. Total pages: 2070678
[ 0.022951] Policy zone: Normal
[ 0.022956] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.022959] software IO TLB: area num 4.
[ 0.055351] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.055371] Kernel/User page tables isolation: enabled
[ 0.055398] ftrace: allocating 42540 entries in 167 pages
[ 0.061251] ftrace: allocated 167 pages with 5 groups
[ 0.061791] Dynamic Preempt: voluntary
[ 0.061823] rcu: Preemptible hierarchical RCU implementation.
[ 0.061823] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.061824] Trampoline variant of Tasks RCU enabled.
[ 0.061825] Rude variant of Tasks RCU enabled.
[ 0.061825] Tracing variant of Tasks RCU enabled.
[ 0.061826] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.061826] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.061831] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.061832] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.061834] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.064502] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.064704] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.064882] spurious 8259A interrupt: IRQ7.
[ 0.067447] Console: colour VGA+ 80x25
[ 0.067450] printk: legacy console [tty0] enabled
[ 0.067482] ACPI: Core revision 20240827
[ 0.067698] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.067800] APIC: Switch to symmetric I/O mode setup
[ 0.068998] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.072123] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.091713] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
[ 0.091718] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
[ 0.091734] x86/cpu: VMX (outside TXT) disabled by BIOS
[ 0.091837] CPU0: Thermal monitoring enabled (TM1)
[ 0.091877] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.091878] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.091882] process: using mwait in idle threads
[ 0.091885] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.091887] Spectre V2 : Mitigation: IBRS
[ 0.091888] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.091888] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.091889] RETBleed: Mitigation: IBRS
[ 0.091891] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.091892] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.091894] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.091900] MDS: Mitigation: Clear CPU buffers
[ 0.091901] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.091905] SRBDS: Mitigation: Microcode
[ 0.091906] GDS: Vulnerable: No microcode
[ 0.091911] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.091912] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.091913] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.091915] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.091916] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.091917] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.091919] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.091920] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.091922] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.113675] Freeing SMP alternatives memory: 36K
[ 0.113680] pid_max: default: 32768 minimum: 301
[ 0.113716] LSM: initializing lsm=lockdown,capability,yama,apparmor,tomoyo
[ 0.113744] Yama: becoming mindful.
[ 0.113820] AppArmor: AppArmor initialized
[ 0.113840] TOMOYO Linux initialized
[ 0.113866] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.113874] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.114340] smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.131824] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.131845] ... version: 4
[ 0.131846] ... bit width: 48
[ 0.131847] ... generic registers: 4
[ 0.131848] ... value mask: 0000ffffffffffff
[ 0.131849] ... max period: 00007fffffffffff
[ 0.131850] ... fixed-purpose events: 3
[ 0.131850] ... event mask: 000000070000000f
[ 0.131955] signal: max sigframe size: 2032
[ 0.131969] Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.133235] rcu: Hierarchical SRCU implementation.
[ 0.133236] rcu: Max phase no-delay instances is 1000.
[ 0.133272] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.133638] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.133678] smp: Bringing up secondary CPUs ...
[ 0.133766] smpboot: x86: Booting SMP configuration:
[ 0.133767] .... node #0, CPUs: #1 #2 #3
[ 0.135872] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.135872] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.135872] smp: Brought up 1 node, 4 CPUs
[ 0.135872] smpboot: Total of 4 processors activated (29598.80 BogoMIPS)
[ 0.147723] node 0 deferred pages initialised in 12ms
[ 0.149316] Memory: 7956476K/8282712K available (14336K kernel code, 2298K rwdata, 6160K rodata, 3984K init, 1652K bss, 319996K reserved, 0K cma-reserved)
[ 0.149316] devtmpfs: initialized
[ 0.149316] x86/mm: Memory block size: 128MB
[ 0.149316] ACPI: PM: Registering ACPI NVS region [mem 0xbcc6d000-0xbcc6dfff] (4096 bytes)
[ 0.149316] ACPI: PM: Registering ACPI NVS region [mem 0xc4059000-0xc4791fff] (7573504 bytes)
[ 0.149316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.149316] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.149316] pinctrl core: initialized pinctrl subsystem
[ 0.152175] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.152312] audit: initializing netlink subsys (disabled)
[ 0.152323] audit: type=2000 audit(1761720440.084:1): state=initialized audit_enabled=0 res=1
[ 0.152323] thermal_sys: Registered thermal governor 'fair_share'
[ 0.152323] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.152323] thermal_sys: Registered thermal governor 'step_wise'
[ 0.152323] thermal_sys: Registered thermal governor 'user_space'
[ 0.152323] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.152323] cpuidle: using governor ladder
[ 0.152323] cpuidle: using governor menu
[ 0.152323] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.152323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.152323] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.152323] PCI: Using configuration type 1 for base access
[ 0.152323] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.152323] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.152323] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.152323] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.152323] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.152323] ACPI: Added _OSI(Module Device)
[ 0.152323] ACPI: Added _OSI(Processor Device)
[ 0.152323] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152323] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181753] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.183165] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.191897] ACPI: Dynamic OEM Table Load:
[ 0.191903] ACPI: SSDT 0xFFFF94AC40E35800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.193075] ACPI: Dynamic OEM Table Load:
[ 0.193080] ACPI: SSDT 0xFFFF94AC409F9800 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.194767] ACPI: Dynamic OEM Table Load:
[ 0.194772] ACPI: SSDT 0xFFFF94AC409FB800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.196137] ACPI: Dynamic OEM Table Load:
[ 0.196141] ACPI: SSDT 0xFFFF94AC40C0C000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.199425] ACPI: Interpreter enabled
[ 0.199455] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.199457] ACPI: Using IOAPIC for interrupt routing
[ 0.199487] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199489] PCI: Using E820 reservations for host bridge windows
[ 0.200194] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.202506] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[ 0.202844] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[ 0.203148] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[ 0.205461] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.205754] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.206046] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.206335] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.206625] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.206919] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.207224] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.207515] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.207822] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.208112] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.208401] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.208690] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.208979] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.209271] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.209560] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.209851] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.210146] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.210435] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.210725] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.211014] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.224007] ACPI: \_TZ_.FN00: New power resource
[ 0.224079] ACPI: \_TZ_.FN01: New power resource
[ 0.224147] ACPI: \_TZ_.FN02: New power resource
[ 0.224214] ACPI: \_TZ_.FN03: New power resource
[ 0.224281] ACPI: \_TZ_.FN04: New power resource
[ 0.225461] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.225467] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.225496] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.225498] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.225499] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.226453] PCI host bridge to bus 0000:00
[ 0.226457] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.226459] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.226461] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.226462] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
[ 0.226463] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.226465] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.226534] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000 conventional PCI endpoint
[ 0.226621] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.226637] pci 0000:00:02.0: BAR 0 [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.226649] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.226657] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.226682] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.226891] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.226917] pci 0000:00:14.0: BAR 0 [mem 0xf7210000-0xf721ffff 64bit]
[ 0.226998] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.227481] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 conventional PCI endpoint
[ 0.227503] pci 0000:00:16.0: BAR 0 [mem 0xf722d000-0xf722dfff 64bit]
[ 0.227563] pci 0000:00:16.0: PME# supported from D3hot
[ 0.227752] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 conventional PCI endpoint
[ 0.227770] pci 0000:00:17.0: BAR 0 [mem 0xf7228000-0xf7229fff]
[ 0.227783] pci 0000:00:17.0: BAR 1 [mem 0xf722c000-0xf722c0ff]
[ 0.227794] pci 0000:00:17.0: BAR 2 [io 0xf090-0xf097]
[ 0.227805] pci 0000:00:17.0: BAR 3 [io 0xf080-0xf083]
[ 0.227815] pci 0000:00:17.0: BAR 4 [io 0xf060-0xf07f]
[ 0.227826] pci 0000:00:17.0: BAR 5 [mem 0xf722b000-0xf722b7ff]
[ 0.227867] pci 0000:00:17.0: PME# supported from D3hot
[ 0.228092] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400 PCIe Root Port
[ 0.228126] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.228130] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.228133] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.228190] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.228588] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400 PCIe Root Port
[ 0.228622] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.228626] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.228628] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.228683] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.229057] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 PCIe Root Port
[ 0.229094] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.229156] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.229526] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100 conventional PCI endpoint
[ 0.229843] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 conventional PCI endpoint
[ 0.229863] pci 0000:00:1f.2: BAR 0 [mem 0xf7224000-0xf7227fff]
[ 0.230107] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 conventional PCI endpoint
[ 0.230137] pci 0000:00:1f.3: BAR 0 [mem 0xf7220000-0xf7223fff 64bit]
[ 0.230182] pci 0000:00:1f.3: BAR 4 [mem 0xf7200000-0xf720ffff 64bit]
[ 0.230232] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.230630] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.230687] pci 0000:00:1f.4: BAR 0 [mem 0xf722a000-0xf722a0ff 64bit]
[ 0.230757] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.231042] pci 0000:01:00.0: [1b4b:9215] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.231063] pci 0000:01:00.0: BAR 0 [io 0xe050-0xe057]
[ 0.231076] pci 0000:01:00.0: BAR 1 [io 0xe040-0xe043]
[ 0.231088] pci 0000:01:00.0: BAR 2 [io 0xe030-0xe037]
[ 0.231101] pci 0000:01:00.0: BAR 3 [io 0xe020-0xe023]
[ 0.231113] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe01f]
[ 0.231126] pci 0000:01:00.0: BAR 5 [mem 0xf7140000-0xf71407ff]
[ 0.231138] pci 0000:01:00.0: ROM [mem 0xf7100000-0xf713ffff pref]
[ 0.231155] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
[ 0.231195] pci 0000:01:00.0: PME# supported from D3hot
[ 0.231293] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.231365] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.231390] pci 0000:02:00.0: BAR 0 [io 0xd000-0xd0ff]
[ 0.231425] pci 0000:02:00.0: BAR 2 [mem 0xf7004000-0xf7004fff 64bit]
[ 0.231446] pci 0000:02:00.0: BAR 4 [mem 0xf7000000-0xf7003fff 64bit]
[ 0.231556] pci 0000:02:00.0: supports D1 D2
[ 0.231558] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.231726] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.231791] acpiphp: Slot [1] registered
[ 0.231800] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.233601] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.233641] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.233679] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.233716] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.233754] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.233793] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.233830] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.233868] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.236691] iommu: Default domain type: Translated
[ 0.236692] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.236747] EDAC MC: Ver: 3.0.0
[ 0.236813] NetLabel: Initializing
[ 0.236813] NetLabel: domain hash size = 128
[ 0.236813] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.236813] NetLabel: unlabeled traffic allowed by default
[ 0.236813] PCI: Using ACPI for IRQ routing
[ 0.243734] PCI: pci_cache_line_size set to 64 bytes
[ 0.243775] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[ 0.243777] e820: reserve RAM buffer [mem 0xbb12c000-0xbbffffff]
[ 0.243778] e820: reserve RAM buffer [mem 0xbcc6d000-0xbfffffff]
[ 0.243780] e820: reserve RAM buffer [mem 0xc275a000-0xc3ffffff]
[ 0.243781] e820: reserve RAM buffer [mem 0xc4059000-0xc7ffffff]
[ 0.243782] e820: reserve RAM buffer [mem 0xc5300000-0xc7ffffff]
[ 0.243783] e820: reserve RAM buffer [mem 0x237000000-0x237ffffff]
[ 0.243800] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.243800] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.243800] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.243800] vgaarb: loaded
[ 0.243800] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.243800] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.245812] clocksource: Switched to clocksource tsc-early
[ 0.245964] VFS: Disk quotas dquot_6.6.0
[ 0.245974] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.246127] AppArmor: AppArmor Filesystem Enabled
[ 0.246144] pnp: PnP ACPI init
[ 0.246367] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.246680] pnp 00:01: [dma 0 disabled]
[ 0.246915] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.246918] system 00:03: [io 0xffff] has been reserved
[ 0.246919] system 00:03: [io 0xffff] has been reserved
[ 0.246921] system 00:03: [io 0xffff] has been reserved
[ 0.246922] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.246923] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.246997] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.247048] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.247264] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.247266] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.247268] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.247269] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.247271] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.247273] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.247274] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.247276] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.247278] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.247280] system 00:07: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[ 0.247282] system 00:07: [mem 0xc5400000-0xc7fffffe] has been reserved
[ 0.247320] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.247322] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.247324] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.247325] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.247327] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.247328] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.247330] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.247555] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.247555] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.247555] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.247555] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.247555] pnp: PnP ACPI: found 11 devices
[ 0.252757] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.252807] NET: Registered PF_INET protocol family
[ 0.252875] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.254003] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.254022] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.254051] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.254220] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.254413] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.254446] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.254466] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.254514] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.254521] NET: Registered PF_XDP protocol family
[ 0.254530] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.254534] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.254536] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.254543] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc81fffff]: assigned
[ 0.254546] pci 0000:00:1d.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]: assigned
[ 0.254549] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]: assigned
[ 0.254551] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.254554] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.254560] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.254572] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.254574] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.254580] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.254591] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.254594] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff]
[ 0.254601] pci 0000:00:1d.0: bridge window [mem 0xc8000000-0xc81fffff]
[ 0.254606] pci 0000:00:1d.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.254615] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.254616] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.254618] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.254619] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
[ 0.254620] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.254622] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.254623] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.254625] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.254626] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.254627] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.254629] pci_bus 0000:03: resource 1 [mem 0xc8000000-0xc81fffff]
[ 0.254630] pci_bus 0000:03: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.255283] PCI: CLS 0 bytes, default 64
[ 0.255333] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 conventional PCI endpoint
[ 0.255391] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.255627] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.255628] software IO TLB: mapped [mem 0x00000000be75a000-0x00000000c275a000] (64MB)
[ 0.255696] Trying to unpack rootfs image as initramfs...
[ 0.256123] Initialise system trusted keyrings
[ 0.256131] Key type blacklist registered
[ 0.256164] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.256176] zbud: loaded
[ 0.256252] trim_trashbin_init
[ 0.256254] trim-trashbin driver major=251,minor=0
[ 0.256368] integrity: Platform Keyring initialized
[ 0.256374] Key type asymmetric registered
[ 0.256375] Asymmetric key parser 'x509' registered
[ 0.688511] Freeing initrd memory: 73640K
[ 0.692884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.692911] io scheduler mq-deadline registered
[ 0.694031] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.694569] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.695309] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.695311] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.695417] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.695419] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.695543] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.695899] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.697263] Linux agpgart interface v0.103
[ 0.697531] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.697533] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.698257] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.698398] mousedev: PS/2 mouse device common for all mice
[ 0.698427] rtc_cmos 00:05: RTC can wake from S4
[ 0.699184] rtc_cmos 00:05: registered as rtc0
[ 0.699310] rtc_cmos 00:05: setting system clock to 2025-10-29T06:47:21 UTC (1761720441)
[ 0.699334] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram
[ 0.699453] intel_pstate: Intel P-state driver initializing
[ 0.699623] intel_pstate: HWP enabled
[ 0.699981] NET: Registered PF_INET6 protocol family
[ 0.704018] Segment Routing with IPv6
[ 0.704032] In-situ OAM (IOAM) with IPv6
[ 0.704053] mip6: Mobile IPv6
[ 0.704057] NET: Registered PF_PACKET protocol family
[ 0.704198] mpls_gso: MPLS GSO support
[ 0.704460] microcode: Current revision: 0x000000f0
[ 0.704461] microcode: Updated early from: 0x00000084
[ 0.704593] IPI shorthand broadcast: enabled
[ 0.705782] sched_clock: Marking stable (701690957, 2889189)->(709690000, -5109854)
[ 0.705941] registered taskstats version 1
[ 0.705974] Loading compiled-in X.509 certificates
[ 0.708247] Demotion targets for Node 0: null
[ 0.708347] Key type .fscrypt registered
[ 0.708349] Key type fscrypt-provisioning registered
[ 0.708386] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.708973] clk: Disabling unused clocks
[ 0.708977] PM: genpd: Disabling unused power domains
[ 0.709931] Freeing unused kernel image (initmem) memory: 3984K
[ 0.709993] Write protecting the kernel read-only data: 22528k
[ 0.710436] Freeing unused kernel image (rodata/data gap) memory: 2032K
[ 0.725065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.749176] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.749178] x86/mm: Checking user space page tables
[ 0.786377] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.786381] Run /init as init process
[ 0.786382] with arguments:
[ 0.786384] /init
[ 0.786385] with environment:
[ 0.786386] HOME=/
[ 0.786387] TERM=linux
[ 0.786387] BOOT_IMAGE=/boot/vmlinuz-6.12.18-trim
[ 0.883292] button: module verification failed: signature and/or required key missing - tainting kernel
[ 0.883843] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.883907] ACPI: button: Sleep Button [SLPB]
[ 0.883969] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.884017] ACPI: button: Power Button [PWRB]
[ 0.884072] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.899143] ACPI: button: Power Button [PWRF]
[ 0.908598] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.908635] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.910021] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 0.912513] ACPI: bus type USB registered
[ 0.920815] usbcore: registered new interface driver usbfs
[ 0.920828] usbcore: registered new interface driver hub
[ 0.920845] usbcore: registered new device driver usb
[ 0.932865] ACPI: bus type drm_connector registered
[ 0.977889] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.977898] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.978999] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 0.979102] SCSI subsystem initialized
[ 0.979435] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.979443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.979448] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.979902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 0.979907] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.979909] usb usb1: Product: xHCI Host Controller
[ 0.979911] usb usb1: Manufacturer: Linux 6.12.18-trim xhci-hcd
[ 0.979912] usb usb1: SerialNumber: 0000:00:14.0
[ 0.980650] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.980822] hub 1-0:1.0: USB hub found
[ 0.980838] hub 1-0:1.0: 10 ports detected
[ 0.982779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 0.982783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.982786] usb usb2: Product: xHCI Host Controller
[ 0.982788] usb usb2: Manufacturer: Linux 6.12.18-trim xhci-hcd
[ 0.982790] usb usb2: SerialNumber: 0000:00:14.0
[ 0.982958] hub 2-0:1.0: USB hub found
[ 0.982970] hub 2-0:1.0: 4 ports detected
[ 0.994694] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 2c:4d:54:53:dc:b6, XID 541, IRQ 124
[ 0.994706] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 0.995982] libata version 3.00 loaded.
[ 0.996631] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 0.997856] ahci 0000:00:17.0: version 3.0
[ 1.008281] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 1.008288] ahci 0000:00:17.0: 4/4 ports implemented (port mask 0xf)
[ 1.008289] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.031377] scsi host0: ahci
[ 1.031547] scsi host1: ahci
[ 1.031697] scsi host2: ahci
[ 1.031818] scsi host3: ahci
[ 1.031881] ata1: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b100 irq 125 lpm-pol 3
[ 1.031884] ata2: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b180 irq 125 lpm-pol 3
[ 1.031886] ata3: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b200 irq 125 lpm-pol 3
[ 1.031888] ata4: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b280 irq 125 lpm-pol 3
[ 1.042231] ahci 0000:01:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode
[ 1.042235] ahci 0000:01:00.0: 4/4 ports implemented (port mask 0xf)
[ 1.042238] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.042743] scsi host4: ahci
[ 1.042870] scsi host5: ahci
[ 1.043001] scsi host6: ahci
[ 1.043122] scsi host7: ahci
[ 1.043174] ata5: SATA max UDMA/133 abar m2048@0xf7140000 port 0xf7140100 irq 126 lpm-pol 0
[ 1.043177] ata6: SATA max UDMA/133 abar m2048@0xf7140000 port 0xf7140180 irq 126 lpm-pol 0
[ 1.043180] ata7: SATA max UDMA/133 abar m2048@0xf7140000 port 0xf7140200 irq 126 lpm-pol 0
[ 1.043182] ata8: SATA max UDMA/133 abar m2048@0xf7140000 port 0xf7140280 irq 126 lpm-pol 0
[ 1.230900] usb 1-10: new full-speed USB device number 2 using xhci_hcd
[ 1.341082] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.341115] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.341131] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.341146] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.341324] ata4.00: ATA-11: KINGSTON SUV400S37120G, 0C3J96R9, max UDMA/133
[ 1.341397] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.342141] ata1.00: ATA-8: ST3500413AS, JC47, max UDMA/133
[ 1.342144] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.342232] ata3.00: ATAPI: ASUS DVD-E818A9T b, 3.00, max UDMA/133
[ 1.343078] ata3.00: configured for UDMA/133
[ 1.343385] ata1.00: configured for UDMA/133
[ 1.343549] ata4.00: configured for UDMA/133
[ 1.345188] scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC47 PQ: 0 ANSI: 5
[ 1.357738] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.368804] usb 1-10: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
[ 1.368809] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.368811] usb 1-10: Product: 2.4G Mouse
[ 1.391681] ata2.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.391686] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32)
[ 1.392115] tsc: Refined TSC clocksource calibration: 3695.988 MHz
[ 1.392119] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d11e346a, max_idle_ns: 881590970436 ns
[ 1.392319] clocksource: Switched to clocksource tsc
[ 1.404231] Setting dangerous option enable_guc - tainting kernel
[ 1.404234] Setting dangerous option force_probe - tainting kernel
[ 1.404338] hid: raw HID events driver (C) Jiri Kosina
[ 1.404842] i915 0000:00:02.0: [drm] Found SKYLAKE (device ID 1912) display version 9.00 stepping G0
[ 1.404931] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A
[ 1.405118] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.405663] Console: switching to colour dummy device 80x25
[ 1.406435] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.411294] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 1.412328] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1
[ 1.412333] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0
[ 1.437660] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[ 1.437684] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[ 1.437686] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[ 1.445835] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
[ 1.447407] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.447666] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.450012] ata2.00: configured for UDMA/133
[ 1.477534] scsi 1:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 1.487607] fbcon: i915drmfb (fb0) is primary device
[ 1.489209] scsi 2:0:0:0: CD-ROM ASUS DVD-E818A9T b 3.00 PQ: 0 ANSI: 5
[ 1.514557] Console: switching to colour frame buffer device 240x67
[ 1.514917] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.514948] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.514969] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.516457] ata6.00: ATA-11: ST4000NM000A-2HZ100, TN03, max UDMA/133
[ 1.516471] ata7.00: ATA-11: ST4000NM000A-2HZ100, TN03, max UDMA/133
[ 1.516495] ata5.00: ATA-11: ST4000NM000A-2HZ100, TN03, max UDMA/133
[ 1.529457] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.529476] ata7.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.529494] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.535516] ata5.00: Features: NCQ-sndrcv
[ 1.535544] ata6.00: Features: NCQ-sndrcv
[ 1.535570] ata7.00: Features: NCQ-sndrcv
[ 1.536708] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 1.553762] scsi 3:0:0:0: Direct-Access ATA KINGSTON SUV400S 96R9 PQ: 0 ANSI: 5
[ 1.555797] ata7.00: configured for UDMA/133
[ 1.555832] ata6.00: configured for UDMA/133
[ 1.555866] ata5.00: configured for UDMA/133
[ 1.556104] scsi 4:0:0:0: Direct-Access ATA ST4000NM000A-2HZ TN03 PQ: 0 ANSI: 5
[ 1.557318] scsi 5:0:0:0: Direct-Access ATA ST4000NM000A-2HZ TN03 PQ: 0 ANSI: 5
[ 1.558502] scsi 6:0:0:0: Direct-Access ATA ST4000NM000A-2HZ TN03 PQ: 0 ANSI: 5
[ 1.572685] usbcore: registered new interface driver usbhid
[ 1.572698] usbhid: USB HID core driver
[ 1.579481] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.579526] sd 0:0:0:0: [sda] Write Protect is off
[ 1.579537] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.579592] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.579687] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.580223] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.580251] sd 6:0:0:0: [sdf] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.580264] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.580274] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.580291] sd 6:0:0:0: [sdf] Write Protect is off
[ 1.580301] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.580332] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.580351] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.580438] sd 6:0:0:0: [sdf] Preferred minimum I/O size 512 bytes
[ 1.580470] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 1.580996] sd 5:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.581067] sd 3:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.581079] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.581117] sd 5:0:0:0: [sde] Write Protect is off
[ 1.581127] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.581159] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.581169] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.581407] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581460] sd 4:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.581474] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581498] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.581506] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.581541] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581604] sd 4:0:0:0: [sdd] Preferred minimum I/O size 512 bytes
[ 1.581616] sd 5:0:0:0: [sde] Preferred minimum I/O size 512 bytes
[ 1.581660] sd 3:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
[ 1.586561] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1EA7:0064.0001/input/input5
[ 1.586708] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1EA7:0064.0001/input/input6
[ 1.587399] hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-10/input0
[ 1.623404] sdc: sdc1 sdc2 sdc3
[ 1.623850] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.649140] sdf: sdf1
[ 1.649404] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 1.658938] sda: sda1
[ 1.659253] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.665228] sdd: sdd1
[ 1.665514] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.676940] sdb: sdb1
[ 1.677234] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.963022] ata6.00: exception Emask 0x10 SAct 0x20 SErr 0x41d0002 action 0xe frozen
[ 1.963094] ata6.00: irq_stat 0x80400000, PHY RDY changed
[ 1.963133] ata6: SError: { RecovComm PHYRdyChg CommWake 10B8B Dispar DevExch }
[ 1.963186] ata6.00: failed command: READ FPDMA QUEUED
[ 1.963221] ata6.00: cmd 60/08:28:08:00:00/00:00:00:00:00/40 tag 5 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 1.963322] ata6.00: status: { DRDY }
[ 1.963356] ata6: hard resetting link
[ 7.718971] ata6: link is slow to respond, please be patient (ready=0)
[ 12.130972] ata6: softreset failed (device not ready)
[ 12.131024] ata6: hard resetting link
[ 13.002991] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 13.055613] ata6.00: configured for UDMA/133
[ 13.055642] ata6: EH complete
[ 13.089125] sde: sde1
[ 13.089421] sd 5:0:0:0: [sde] Attached SCSI disk
[ 13.163701] sr 2:0:0:0: [sr0] scsi3-mmc drive: 12x/48x cd/rw xa/form2 cdda tray
[ 13.163714] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 13.204562] block device autoloading is deprecated and will be removed.
[ 13.210838] device-mapper: uevent: version 1.0.3
[ 13.210939] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 13.228313] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 13.246317] block device autoloading is deprecated and will be removed.
[ 13.351617] md127: detected capacity change from 0 to 1288820736
[ 13.555097] ata5.00: exception Emask 0x10 SAct 0x40 SErr 0x41d0002 action 0xe frozen
[ 13.555172] ata5.00: irq_stat 0x80400000, PHY RDY changed
[ 13.555210] ata5: SError: { RecovComm PHYRdyChg CommWake 10B8B Dispar DevExch }
[ 13.555263] ata5.00: failed command: READ FPDMA QUEUED
[ 13.555298] ata5.00: cmd 60/08:30:00:be:c0/00:00:d1:01:00/40 tag 6 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 13.555399] ata5.00: status: { DRDY }
[ 13.555456] ata5: hard resetting link
[ 19.310974] ata5: link is slow to respond, please be patient (ready=0)
[ 23.722980] ata5: softreset failed (device not ready)
[ 23.723035] ata5: hard resetting link
[ 25.770995] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 25.850011] ata5.00: configured for UDMA/133
[ 25.850043] sd 4:0:0:0: [sdd] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=12s
[ 25.850054] sd 4:0:0:0: [sdd] tag#6 Sense Key : Illegal Request [current]
[ 25.850062] sd 4:0:0:0: [sdd] tag#6 Add. Sense: Unaligned write command
[ 25.850070] sd 4:0:0:0: [sdd] tag#6 CDB: Read(16) 88 00 00 00 00 01 d1 c0 be 00 00 00 00 08 00 00
[ 25.850076] I/O error, dev sdd, sector 7814036992 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 25.850168] ata5: EH complete
[ 26.122897] raid6: avx2x4 gen() 40478 MB/s
[ 26.190922] raid6: avx2x2 gen() 40906 MB/s
[ 26.258896] raid6: avx2x1 gen() 34671 MB/s
[ 26.258897] raid6: using algorithm avx2x2 gen() 40906 MB/s
[ 26.326923] raid6: .... xor() 23211 MB/s, rmw enabled
[ 26.326924] raid6: using avx2x2 recovery algorithm
[ 26.327219] xor: automatically using best checksumming function avx
[ 26.327422] async_tx: api initialized (async)
[ 26.330785] md/raid:md126: device sdd1 operational as raid disk 1
[ 26.330789] md/raid:md126: device sde1 operational as raid disk 0
[ 26.330791] md/raid:md126: device sdf1 operational as raid disk 2
[ 26.331303] md/raid:md126: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 26.371859] md126: detected capacity change from 0 to 15627538432
[ 26.832844] Btrfs loaded, zoned=yes, fsverity=yes
[ 32.642987] ata6: link is slow to respond, please be patient (ready=0)
[ 37.055019] ata6: softreset failed (device not ready)
[ 37.926982] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 38.001103] ata6.00: configured for UDMA/133
[ 38.305365] EXT4-fs (sdc2): mounted filesystem 3ff1ebb2-e799-48ed-abf4-70f1de4efac6 ro with ordered data mode. Quota mode: none.
[ 38.419317] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 38.532729] systemd[1]: Inserted module 'autofs4'
[ 38.565330] systemd[1]: systemd 252.38-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 38.565348] systemd[1]: Detected architecture x86-64.
[ 38.567330] systemd[1]: Hostname set to .
[ 38.747669] systemd[1]: /etc/systemd/system/rc-local.service:12: Support for option Sy**tartPriority= has been removed and it is ignored
[ 38.823065] systemd[1]: Queued start ** for default target graphical.target.
[ 38.856476] systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
[ 38.857529] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 38.858232] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 38.858995] systemd[1]: Created slice system-postgresql.slice - Slice /system/postgresql.
[ 38.859464] systemd[1]: Created slice user.slice - User and Session Slice.
[ 38.859588] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 38.859860] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 38.859935] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 38.860038] systemd[1]: Reached target nss-lookup.target - Host and Network Name Lookups.
[ 38.860124] systemd[1]: Reached target slices.target - Slice Units.
[ 38.860204] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 38.860242] systemd[1]: Reached target virt-guest-shutdown.target - Libvirt guests shutdown.
[ 38.860370] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 38.860571] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 38.865607] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[ 38.865871] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 38.866067] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 38.866182] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 38.866700] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 38.866867] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 38.867086] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 38.868686] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 38.869174] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 38.873296] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 38.877526] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 38.882987] systemd[1]: Mounting proc-fs-nfsd.mount - NFSD configuration filesystem...
[ 38.888255] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 38.892337] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 38.892984] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 38.893345] systemd[1]: Finished blk-availability.service - Availability of block devices.
[ 38.897156] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 38.900057] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 38.902653] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 38.905171] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 38.907792] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 38.911129] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 38.913735] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 38.915511] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 38.919726] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 38.920323] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 38.923219] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 38.927894] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 38.929896] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 38.932070] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 38.939714] systemd[1]: Started trim_wayland.service - Trim Wayland Service.
[ 38.941781] systemd[1]: Started trim_miniscreen.service - Trim Miniscreen Service.
[ 38.944698] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 38.945130] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 38.945510] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 38.945855] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 38.946398] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 38.947074] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 38.947297] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 38.947725] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 38.947933] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 38.954251] systemd[1]: trim_miniscreen.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
[ 38.955075] systemd[1]: trim_miniscreen.service: Failed with result 'exit-code'.
[ 38.955693] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 38.955868] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 38.959534] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 38.960079] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 38.960347] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 38.962187] RPC: Registered named UNIX socket transport module.
[ 38.962190] RPC: Registered udp transport module.
[ 38.962192] RPC: Registered tcp transport module.
[ 38.962193] RPC: Registered tcp-with-tls transport module.
[ 38.962194] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 38.962293] systemd[1]: trim_wayland.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
[ 38.962561] systemd[1]: trim_wayland.service: Failed with result 'exit-code'.
[ 38.962961] fuse: init (API version 7.41)
[ 38.964730] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 38.964904] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 38.965114] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 38.966368] loop: module loaded
[ 38.967063] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 38.967619] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 38.967829] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 38.968157] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 38.970561] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 38.982823] EXT4-fs (sdc2): re-mounted 3ff1ebb2-e799-48ed-abf4-70f1de4efac6 r/w. Quota mode: none.
[ 38.985318] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 38.987707] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 38.988141] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 38.989879] systemd[1]: Activating swap swapfile.swap - /swapfile...
[ 38.989954] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 38.990035] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 38.992294] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 38.993743] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 39.009656] Adding 8388604k swap on /swapfile. Priority:-2 extents:19 across:77584220k SS
[ 39.009739] systemd[1]: Activated swap swapfile.swap - /swapfile.
[ 39.010066] systemd[1]: Reached target swap.target - Swaps.
[ 39.051674] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 39.058764] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 39.059164] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 39.061401] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 39.064963] systemd[1]: Mounted proc-fs-nfsd.mount - NFSD configuration filesystem.
[ 39.066951] systemd[1]: Started systemd-journald.service - Journal Service.
[ 39.078009] systemd-journald[349]: Received client request to flush runtime journal.
[ 39.250224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.250302] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 39.250437] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 39.250484] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 39.250537] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 39.250579] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 39.250628] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 39.319008] ata5.00: exception Emask 0x10 SAct 0x200080 SErr 0x41d0002 action 0xe frozen
[ 39.319038] ata5.00: irq_stat 0x80400000, PHY RDY changed
[ 39.319053] ata5: SError: { RecovComm PHYRdyChg CommWake 10B8B Dispar DevExch }
[ 39.319075] ata5.00: failed command: READ FPDMA QUEUED
[ 39.319088] ata5.00: cmd 60/00:38:00:08:00/01:00:00:00:00/40 tag 7 ncq dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 39.319127] ata5.00: status: { DRDY }
[ 39.319139] ata5.00: failed command: READ FPDMA QUEUED
[ 39.319152] ata5.00: cmd 60/08:a8:80:b3:c0/00:00:d1:01:00/40 tag 21 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
[ 39.319187] ata5.00: status: { DRDY }
[ 39.319199] ata5: hard resetting link
[ 39.452766] EDAC ie31200: No ECC support
[ 39.458593] EDAC ie31200: No ECC support
[ 39.476019] iTCO_vendor_support: vendor-support=0
[ 39.477933] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 39.478321] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 39.495914] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 39.496767] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.506967] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 39.506972] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 39.506973] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 39.506975] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 39.506976] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 39.514975] cryptd: max_cpu_qlen set to 1000
[ 39.548737] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 39.550043] asus_wmi: ASUS WMI generic driver loaded
[ 39.573060] asus_wmi: Initialization: 0x0
[ 39.573091] asus_wmi: BIOS WMI version: 0.9
[ 39.573181] asus_wmi: SFUN value: 0x0
[ 39.573186] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 39.577168] AES CTR mode by8 optimization enabled
[ 39.582521] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 39.613099] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 39.680347] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 39.680353] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 39.680355] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 39.680357] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 39.680358] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 39.680360] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 39.680361] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 39.680363] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 39.680364] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 39.686021] intel_rapl_common: Found RAPL domain package
[ 39.686025] intel_rapl_common: Found RAPL domain core
[ 39.686027] intel_rapl_common: Found RAPL domain uncore
[ 39.686028] intel_rapl_common: Found RAPL domain dram
[ 39.708277] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 39.708340] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 39.708402] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 39.708467] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 39.708527] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 39.708590] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 39.708792] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 39.708856] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 45.075033] ata5: link is slow to respond, please be patient (ready=0)
[ 49.491016] ata5: softreset failed (device not ready)
[ 49.491073] ata5: hard resetting link
[ 50.363001] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 50.409054] ata5.00: configured for UDMA/133
[ 50.409101] sd 4:0:0:0: [sdd] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=11s
[ 50.409112] sd 4:0:0:0: [sdd] tag#21 Sense Key : Illegal Request [current]
[ 50.409121] sd 4:0:0:0: [sdd] tag#21 Add. Sense: Unaligned write command
[ 50.409129] sd 4:0:0:0: [sdd] tag#21 CDB: Read(16) 88 00 00 00 00 01 d1 c0 b3 80 00 00 00 08 00 00
[ 50.409134] I/O error, dev sdd, sector 7814034304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 50.409219] ata5: EH complete
[ 50.533198] audit: type=1400 audit(1761720491.329:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=764 comm="apparmor_parser"
[ 50.533714] audit: type=1400 audit(1761720491.329:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=765 comm="apparmor_parser"
[ 50.533722] audit: type=1400 audit(1761720491.329:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=765 comm="apparmor_parser"
[ 50.535171] audit: type=1400 audit(1761720491.333:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=767 comm="apparmor_parser"
[ 50.535177] audit: type=1400 audit(1761720491.333:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=767 comm="apparmor_parser"
[ 50.535180] audit: type=1400 audit(1761720491.333:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=767 comm="apparmor_parser"
[ 50.540373] audit: type=1400 audit(1761720491.337:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=792 comm="apparmor_parser"
[ 50.542070] audit: type=1400 audit(1761720491.337:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
[ 50.542079] audit: type=1400 audit(1761720491.337:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=766 comm="apparmor_parser"
[ 50.542083] audit: type=1400 audit(1761720491.337:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
[ 51.061674] openvswitch: Open vSwitch switching datapath
[ 51.085140] NET: Registered PF_QIPCRTR protocol family
[ 51.130968] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 51.308160] r8169 0000:02:00.0 enp2s0: Link is Down
[ 51.325132] ovs-system: entered promiscuous mode
[ 51.329409] Timeout policy base is empty
[ 51.429516] r8169 0000:02:00.0 enp2s0: entered promiscuous mode
[ 51.436028] enp2s0-ovs: entered promiscuous mode
[ 51.616326] tun: Universal TUN/TAP device driver, 1.6
[ 54.327058] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[ 54.566333] NFSD: Using nfsdcld client tracking operations.
[ 54.566336] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
[ 54.861749] BTRFS: device fsid da7ae107-3465-4f40-9db4-0556db0d577c devid 1 transid 251 /dev/mapper/trim_d5196ca1_ef23_4f03_91e0_3940d0aa667c-0 (253:1) scanned by mount (1564)
[ 54.862677] BTRFS info (device dm-1): first mount of filesystem da7ae107-3465-4f40-9db4-0556db0d577c
[ 54.862703] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm
[ 54.862716] BTRFS info (device dm-1): using free-space-tree
[ 54.920647] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1582)
[ 54.921299] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 54.921342] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 54.921358] BTRFS info (device dm-2): using free-space-tree
[ 55.044492] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 55.065847] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 55.068245] BTRFS error (device dm-2): failed to read block groups: -5
[ 55.071997] BTRFS error (device dm-2): open_ctree failed: -5
[ 55.086839] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 55.107303] BTRFS: device fsid 30d31bd8-f83a-492f-bf0f-f7b9cbe147ae devid 1 transid 132823 /dev/mapper/trim_7aa29401_3aa6_44b6_ae5c_77d866063ee0-0 (253:0) scanned by mount (1609)
[ 55.107978] BTRFS info (device dm-0): first mount of filesystem 30d31bd8-f83a-492f-bf0f-f7b9cbe147ae
[ 55.108002] BTRFS info (device dm-0): using crc32c (crc32c-intel) checksum algorithm
[ 55.108015] BTRFS info (device dm-0): using free-space-tree
[ 61.130912] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1665)
[ 61.131253] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 61.131266] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 61.131272] BTRFS info (device dm-2): using free-space-tree
[ 61.138979] ata6: link is slow to respond, please be patient (ready=0)
[ 65.559024] ata6: softreset failed (device not ready)
[ 66.431003] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 66.478468] ata6.00: configured for UDMA/133
[ 66.551584] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 66.650025] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 66.650194] BTRFS error (device dm-2): failed to read block groups: -5
[ 66.651824] BTRFS error (device dm-2): open_ctree failed: -5
[ 66.658779] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 72.683569] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1699)
[ 72.684446] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 72.684478] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 72.684492] BTRFS info (device dm-2): using free-space-tree
[ 72.707344] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 72.707495] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 72.707546] BTRFS error (device dm-2): failed to read block groups: -5
[ 72.707855] BTRFS error (device dm-2): open_ctree failed: -5
[ 72.709910] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 78.722310] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1724)
[ 78.722638] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 78.722649] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 78.722654] BTRFS info (device dm-2): using free-space-tree
[ 78.725886] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 78.726050] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 78.726081] BTRFS error (device dm-2): failed to read block groups: -5
[ 78.726528] BTRFS error (device dm-2): open_ctree failed: -5
[ 78.728752] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 84.752559] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1751)
[ 84.752901] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 84.752918] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 84.752923] BTRFS info (device dm-2): using free-space-tree
[ 84.756156] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 84.756283] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 84.756307] BTRFS error (device dm-2): failed to read block groups: -5
[ 84.756669] BTRFS error (device dm-2): open_ctree failed: -5
[ 84.758861] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 90.771994] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1776)
[ 90.772565] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 90.772578] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 90.772583] BTRFS info (device dm-2): using free-space-tree
[ 90.775910] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 90.776045] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 90.776085] BTRFS error (device dm-2): failed to read block groups: -5
[ 90.777342] BTRFS error (device dm-2): open_ctree failed: -5
[ 90.780023] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 96.796635] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1801)
[ 96.797260] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 96.797287] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 96.797298] BTRFS info (device dm-2): using free-space-tree
[ 96.803368] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 96.803603] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 96.803695] BTRFS error (device dm-2): failed to read block groups: -5
[ 96.805139] BTRFS error (device dm-2): open_ctree failed: -5
[ 96.812096] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 102.834611] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1826)
[ 102.835503] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 102.835535] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 102.835550] BTRFS info (device dm-2): using free-space-tree
[ 102.843016] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 102.843330] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 102.843449] BTRFS error (device dm-2): failed to read block groups: -5
[ 102.845254] BTRFS error (device dm-2): open_ctree failed: -5
[ 102.854297] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 108.875791] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1851)
[ 108.876420] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 108.876451] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 108.876468] BTRFS info (device dm-2): using free-space-tree
[ 108.882541] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 108.882805] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 108.882960] BTRFS error (device dm-2): failed to read block groups: -5
[ 108.884159] BTRFS error (device dm-2): open_ctree failed: -5
[ 108.891091] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 114.913851] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1876)
[ 114.914477] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 114.914507] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 114.914524] BTRFS info (device dm-2): using free-space-tree
[ 114.925772] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 114.925996] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 114.926080] BTRFS error (device dm-2): failed to read block groups: -5
[ 114.927355] BTRFS error (device dm-2): open_ctree failed: -5
[ 114.932113] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 120.943508] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1901)
[ 120.943896] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 120.943908] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 120.943913] BTRFS info (device dm-2): using free-space-tree
[ 120.947386] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 120.947555] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 120.947589] BTRFS error (device dm-2): failed to read block groups: -5
[ 120.948731] BTRFS error (device dm-2): open_ctree failed: -5
[ 120.951448] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 126.962423] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1926)
[ 126.962807] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 126.962821] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 126.962827] BTRFS info (device dm-2): using free-space-tree
[ 126.971258] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 126.971457] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 126.971507] BTRFS error (device dm-2): failed to read block groups: -5
[ 126.972335] BTRFS error (device dm-2): open_ctree failed: -5
[ 126.976017] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 132.986367] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1951)
[ 132.986697] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 132.986711] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 132.986717] BTRFS info (device dm-2): using free-space-tree
[ 132.989873] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 132.991098] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 132.991817] BTRFS error (device dm-2): failed to read block groups: -5
[ 132.993415] BTRFS error (device dm-2): open_ctree failed: -5
[ 132.996284] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 139.009805] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1975)
[ 139.010098] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 139.010113] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 139.010118] BTRFS info (device dm-2): using free-space-tree
[ 139.013602] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 139.014350] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 139.015068] BTRFS error (device dm-2): failed to read block groups: -5
[ 139.016146] BTRFS error (device dm-2): open_ctree failed: -5
[ 139.019003] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 145.032875] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (1998)
[ 145.033319] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 145.033334] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 145.033341] BTRFS info (device dm-2): using free-space-tree
[ 145.036985] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 145.038228] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 145.038999] BTRFS error (device dm-2): failed to read block groups: -5
[ 145.039961] BTRFS error (device dm-2): open_ctree failed: -5
[ 145.043017] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 151.056940] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2020)
[ 151.057281] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 151.057293] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 151.057298] BTRFS info (device dm-2): using free-space-tree
[ 151.060495] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 151.060633] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 151.060670] BTRFS error (device dm-2): failed to read block groups: -5
[ 151.061076] BTRFS error (device dm-2): open_ctree failed: -5
[ 151.063442] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 157.076803] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2050)
[ 157.077111] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 157.077122] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 157.077126] BTRFS info (device dm-2): using free-space-tree
[ 157.080307] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 157.080435] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 157.080471] BTRFS error (device dm-2): failed to read block groups: -5
[ 157.081780] BTRFS error (device dm-2): open_ctree failed: -5
[ 157.084422] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 163.097997] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2069)
[ 163.098378] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 163.098391] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 163.098395] BTRFS info (device dm-2): using free-space-tree
[ 163.101843] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 163.101980] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 163.102013] BTRFS error (device dm-2): failed to read block groups: -5
[ 163.103174] BTRFS error (device dm-2): open_ctree failed: -5
[ 163.105779] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 169.118480] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2088)
[ 169.118778] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 169.118791] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 169.118795] BTRFS info (device dm-2): using free-space-tree
[ 169.126236] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 169.126361] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 169.126386] BTRFS error (device dm-2): failed to read block groups: -5
[ 169.126770] BTRFS error (device dm-2): open_ctree failed: -5
[ 169.129128] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 175.142569] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2108)
[ 175.143524] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 175.143539] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 175.143544] BTRFS info (device dm-2): using free-space-tree
[ 175.146597] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 175.146751] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 175.146779] BTRFS error (device dm-2): failed to read block groups: -5
[ 175.147285] BTRFS error (device dm-2): open_ctree failed: -5
[ 175.149321] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 181.162891] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2127)
[ 181.163204] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 181.163216] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 181.163221] BTRFS info (device dm-2): using free-space-tree
[ 181.166610] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 181.166747] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 181.166783] BTRFS error (device dm-2): failed to read block groups: -5
[ 181.167263] BTRFS error (device dm-2): open_ctree failed: -5
[ 181.169679] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 187.183172] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2146)
[ 187.183536] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 187.183548] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 187.183553] BTRFS info (device dm-2): using free-space-tree
[ 187.186642] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 187.186815] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 187.186849] BTRFS error (device dm-2): failed to read block groups: -5
[ 187.188111] BTRFS error (device dm-2): open_ctree failed: -5
[ 187.190401] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 193.206162] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2165)
[ 193.206530] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 193.206543] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 193.206548] BTRFS info (device dm-2): using free-space-tree
[ 193.209812] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 193.209938] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 193.209964] BTRFS error (device dm-2): failed to read block groups: -5
[ 193.211479] BTRFS error (device dm-2): open_ctree failed: -5
[ 193.213750] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 199.227146] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2184)
[ 199.227475] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 199.227487] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 199.227492] BTRFS info (device dm-2): using free-space-tree
[ 199.230644] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 199.230781] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 199.230812] BTRFS error (device dm-2): failed to read block groups: -5
[ 199.231374] BTRFS error (device dm-2): open_ctree failed: -5
[ 199.233602] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 205.247102] BTRFS: device fsid bb5c066e-f315-4382-8c8b-fd67fa00c2be devid 1 transid 2970 /dev/mapper/trim_22dcbfcc_b6f8_41a6_a8fe_770385d3afa0-0 (253:2) scanned by mount (2202)
[ 205.247471] BTRFS info (device dm-2): first mount of filesystem bb5c066e-f315-4382-8c8b-fd67fa00c2be
[ 205.247484] BTRFS info (device dm-2): using crc32c (crc32c-intel) checksum algorithm
[ 205.247488] BTRFS info (device dm-2): using free-space-tree
[ 205.250655] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 1 wanted 2968 found 852
[ 205.250797] BTRFS error (device dm-2): parent transid verify failed on logical 913293312 mirror 2 wanted 2968 found 852
[ 205.250835] BTRFS error (device dm-2): failed to read block groups: -5
[ 205.252009] BTRFS error (device dm-2): open_ctree failed: -5
[ 205.254456] EXT4-fs (dm-2): VFS: Can't find ext4 filesystem
[ 211.426488] trim_trashbin_open
[ 211.454635] show_signal: 3 callbacks suppressed
[ 211.454639] traps: finder_service[2300] trap int3 ip:55a6938f7563 sp:7ffc268e20b0 error:0 in finder_service[8b563,55a693896000+6e000]
[ 211.698054] ata6: limiting SATA link speed to 3.0 Gbps
[ 212.700240] audit: type=1400 audit(1761720653.497:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2699 comm="apparmor_parser"
[ 212.811808] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 212.813210] Bridge firewalling registered
[ 212.869049] Initializing XFRM netlink socket
[ 212.936984] /dev/sdf: Can't open blockdev
[ 212.974620] /dev/sdd: Can't open blockdev
[ 213.004062] /dev/sdb: Can't open blockdev
[ 217.439031] ata6: link is slow to respond, please be patient (ready=0)
[ 221.907035] ata6: softreset failed (device not ready)
[ 222.782961] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 222.822763] ata6.00: configured for UDMA/133
[ 222.931819] /dev/sde: Can't open blockdev
[ 222.982709] /dev/sda: Can't open blockdev
smart
:/mnt# smartctl -a /dev/sdd
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.18-trim] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION === Model Family: Seagate Exos 7E8 Device Model: ST4000NM000A-2HZ100 Serial Number: WS25ASTT LU WWN Device Id: 5 000c50 0f7e52076 Firmware Version: TN03 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5852 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Oct 29 15:43:40 2025 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 409) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 084 069 044 Pre-fail Always - 236481976 3 Spin_Up_Time 0x0003 098 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2524 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 061 060 045 Pre-fail Always - 1152696 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 5254 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1221 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 190 Airflow_Temperature_Cel 0x0022 061 050 040 Old_age Always - 39 (Min/Max 38/39) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1206 193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 11640 194 Temperature_Celsius 0x0022 039 050 000 Old_age Always - 39 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 084 069 000 Old_age Always - 236481976 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 133h+01m+07.109s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 443063645 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 37559140
SMART Error Log Version: 1 No Errors Logged
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Interrupted (host reset) 00% 5245 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
:/mnt# smartctl -a /dev/sde smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.18-trim] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION === Model Family: Seagate Exos 7E8 Device Model: ST4000NM000A-2HZ100 Serial Number: WS25AWQJ LU WWN Device Id: 5 000c50 0f7e4d63f Firmware Version: TN03 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5852 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Wed Oct 29 15:43:46 2025 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 393) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 073 065 044 Pre-fail Always - 18455699 3 Spin_Up_Time 0x0003 098 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2732 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 061 060 045 Pre-fail Always - 1254048 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 5242 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1427 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 190 Airflow_Temperature_Cel 0x0022 063 051 040 Old_age Always - 37 (Min/Max 37/37) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1411 193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 11441 194 Temperature_Celsius 0x0022 037 049 000 Old_age Always - 37 (0 20 0 0 0) 195 Hardware_ECC_Recovered 0x001a 073 065 000 Old_age Always - 18455699 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 152h+27m+57.049s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 442928253 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 63848340
SMART Error Log Version: 1 No Errors Logged
^[[ASMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Interrupted (host reset) 00% 5232 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
:/mnt# smartctl -a /dev/sdf smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.18-trim] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION === Model Family: Seagate Exos 7E8 Device Model: ST4000NM000A-2HZ100 Serial Number: WS25AR7M LU WWN Device Id: 5 000c50 0f7e54cd7 Firmware Version: TN03 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5852 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Oct 29 15:43:48 2025 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 400) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 084 069 044 Pre-fail Always - 235788693 3 Spin_Up_Time 0x0003 095 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1342 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail Always - 908090 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 5255 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 33 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 190 Airflow_Temperature_Cel 0x0022 064 053 040 Old_age Always - 36 (Min/Max 22/40) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17 193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 10459 194 Temperature_Celsius 0x0022 036 047 000 Old_age Always - 36 (0 20 0 0 0) 195 Hardware_ECC_Recovered 0x001a 084 069 000 Old_age Always - 235788693 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 137h+41m+57.053s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 442822125 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 37114052
SMART Error Log Version: 1 No Errors Logged
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Completed without error 00% 5245 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
