1.1.18版本无法使用R8169网卡

zsd100

设备环境：物理机、系统版本号1.1.18

BUG现象：升级1.1.18后原正常使用的R8169网卡从设置里消失，lspci可以看到设备存在。用官网最新1.1.18镜像重装系统，在安装程序时可以正常监测到该网卡，进入系统后依旧消失无法启动网卡。使用旧版本镜像安装后正常，目前仅1.1.18版本存在该问题。

出现频率：必现

日志文件：无

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at df320000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at df300000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: r8169

zsd100

经进一步检查发现内核被移除了R8169的驱动，在官网下载r8169-6.032.00.tar.bz2，然后编译安装加载（modprobe r8169）后恢复

driver: r8169
version: 6.032.00-NAPI
firmware-version:
expansion-rom-version:
bus-info: 0000:03:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no