系统版本：X86/ARM
设备环境：（物理机、局域网、系统）
BUG现象：更新1.1.3102后，开机不能自动加载网卡驱动，必须要tty终端中使用命令 sudo modprobe r8169 来加载，然后能正常工作。
内核：Linux FN-NAS 6.18.18-trim #473 SMP PREEMPT_DYNAMIC Thu Apr 9 09:34:02 UTC 2026 x86_64 GNU/Linux
网卡型号：
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
出现频率：必现，启动时选择6.12内核能正常加载驱动
联系方式：small09@qq.com
日志文件：
sudo dmesg | grep eth | grep -v veth
[ 1.403675] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20250807/psparse-529)
[ 1.403821] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20250807/psparse-529)
[ 1.404669] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20250807/psparse-529)
[ 1.404781] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20250807/psparse-529)
[ 1.405112] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20250807/psparse-529)
[ 1.416480] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20250807/psparse-529)
[ 286.444281] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 00:e2:69:43:91:d8, XID 541, IRQ 138
[ 286.444286] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 286.448184] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 286.454923] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 00:e2:69:43:91:d9, XID 541, IRQ 139
[ 286.454929] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 286.457895] r8169 0000:02:00.0 enp2s0: renamed from eth0
