系统更新后DG1显卡无法驱动

设备环境：（pve8 虚拟机、局域网、系统0.8.39）

BUG现象：（pve8上运行的飞牛虚拟机在更新了最新系统后 dg1显卡不能再正常驱动；之前使用根据皮蛋熊的教程可以正常驱动，后来再没更新系统和软件 最近版本迭代较多尝试更新系统，今天才发现硬件加速不能使用的问题；卸载商店驱动，重装教程的v1 v2 v3 驱动均不能正常使用）

出现频率：（必现）

联系方式：（83群-季忆留夏）

root@fnOS:~# dmesg | grep i915 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6.38-trim root=UUID=e86e12e4-6b94-4fc6-9b0c-92482a8e7cf3 ro modprobe.blacklist=pcspkr quiet pcie_aspm=off i915.force_probe=7d55 [ 0.027614] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.38-trim root=UUID=e86e12e4-6b94-4fc6-9b0c-92482a8e7cf3 ro modprobe.blacklist=pcspkr quiet pcie_aspm=off i915.force_probe=7d55 [ 4.396143] i915_compat: loading out-of-tree module taints kernel. [ 4.979969] i915: unknown parameter 'force_probe' ignored [ 4.980638] i915 0000:01:00.0: [drm] GT count: 1, enabled: 1 [ 14.981264] i915 0000:01:00.0: [drm] Waiting for HW initialisation... [ 194.982657] i915 0000:01:00.0: [drm] ERROR gt0: intel_pcode_init failed -517 [ 194.982833] i915 0000:01:00.0: Device initialization failed (-517) [ 194.983309] i915 0000:01:00.0: [drm] GT count: 1, enabled: 1

已收到同类反馈，我们跟进一下

设备环境：物理机D-1581M、局域网、系统0.8.39
驱动，重装教程的v1 v2 v3 驱动均不能正常使用；目前使用V2驱动，jellyfin可以调用GPU 4K 转码，影音4K视频不能调用GPU，1080P视频可以调用GPU解码
root@D-1581:~# dmesg | grep i915
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6.38-trim root=UUID=cf578c59-f801-41ad-94be-94fb7b76450d ro modprobe.blacklist=pcspkr quiet pcie_aspm=off i915.force_probe=7d55
[    0.027208] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.38-trim root=UUID=cf578c59-f801-41ad-94be-94fb7b76450d ro modprobe.blacklist=pcspkr quiet pcie_aspm=off i915.force_probe=7d55
[    8.025514] i915: unknown parameter 'force_probe' ignored
[    8.026707] i915 0000:06:00.0: [drm] GT count: 1, enabled: 1
[    8.028441] i915 0000:06:00.0: vgaarb: deactivate vga console
[    8.028449] i915 0000:06:00.0: Attaching to 65413MiB of system memory on node 0
[    8.028470] i915 0000:06:00.0: [drm] Using Transparent Hugepages
[    8.028649] i915 0000:06:00.0: [drm] Local memory IO size: 0x0000000100000000
[    8.028651] i915 0000:06:00.0: [drm] Local memory available: 0x00000000fb800000
[    8.106890] i915 0000:06:00.0: [drm] Finished loading DMC firmware i915/dg1_dmc_ver2_02.bin (v2.2)
[    8.121731] i915 0000:06:00.0: [drm] GT0: GuC firmware i915/dg1_guc_70.19.2.bin version 70.19.2
[    8.121736] i915 0000:06:00.0: [drm] GT0: HuC firmware i915/dg1_huc_7.9.3.bin version 7.9.3
[    8.126951] i915 0000:06:00.0: [drm] GT0: HuC: authenticated!
[    8.127286] i915 0000:06:00.0: [drm] GT0: GUC: submission enabled
[    8.127288] i915 0000:06:00.0: [drm] GT0: GUC: SLPC enabled
[    8.127464] i915 0000:06:00.0: [drm] GT0: GUC: RC enabled
[    8.135638] i915 0000:06:00.0: GT0: local0 bcs'0.0 clear bandwidth:60390 MB/s
[    8.157463] i915 0000:06:00.0: GT0: local0 bcs'0.0 swap bandwidth:5643 MB/s
[    8.174288] [drm] Initialized i915 1.6.0 20201103 for 0000:06:00.0 on minor 0
[    8.204459] i915 0000:06:00.0: SPI access overridden by jumper
[    8.206033] snd_hda_intel 0000:07:00.0: bound 0000:06:00.0 (ops i915_audio_component_bind_ops [i915])
[    8.224074] Creating 4 MTD partitions on "i915.spi.1536":
[    8.224079] 0x000000000000-0x000000001000 : "i915.spi.1536.DESCRIPTOR"
[    8.226364] 0x000000001000-0x0000005f0000 : "i915.spi.1536.GSC"
[    8.228697] 0x0000005f0000-0x0000007f0000 : "i915.spi.1536.OptionROM"
[    8.231085] 0x0000007f0000-0x000000800000 : "i915.spi.1536.DAM"