RTL8111/8168/8411网卡被识别成百兆

Accidia

设备环境：

内核： 6.6.38-trim

飞牛OS版本: 0.8.41

网卡驱动

  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: enp1s0
       version: 15
       serial: 00:e0:67:15:9e:ed
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.055.00-NAPI duplex=full ip=192.168.8.129 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:19 ioport:3000(size=256) memory:b2004000-b2004fff memory:b2000000-b2003fff

dkms状态:

r8168/8.055.00, 6.6.38-trim, x86_64: built

BUG现象：手动升级dkms版本也没有效果，执行 apt upgrade操作也会由于r8168-dkms导致失败

0 upgraded, 0 newly installed, 0 to remove and 25 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up r8168-dkms (8.055.00-1) ...
Removing old r8168/8.055.00 DKMS files...
Module r8168/8.055.00 is not installed for kernel 6.6.38-trim (x86_64). Skipping...

Deleting module r8168/8.055.00 completely from the DKMS tree.
Loading new r8168/8.055.00 DKMS files...
Building for 6.6.38-trim

Building initial module r8168/8.055.00 for 6.6.38-trim
Done.
Module /lib/modules/6.6.38-trim/kernel/drivers/net/ethernet/realtek/r8168.ko already installed at version 8.055.00-NAPI, override by specifying --force

Error! Installation aborted.
dpkg: error processing package r8168-dkms (--configure):
 installed r8168-dkms package post-installation script subprocess returned error exit status 6
Processing triggers for initramfs-tools (0.142+deb12u1) ...
update-initramfs: Generating /boot/initrd.img-6.6.38-trim
Errors were encountered while processing:
 r8168-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)

出现频率：必现

联系方式：飞牛私有云 fnOS409-accidia

日志文件：

飞牛技术同学

感谢反馈， 这个问题我们复现一下看看，  有尝试调整一下设备与路由器的距离，看看有改善么

Accidia

飞牛技术同学 发表于 2025-3-26 19:12
感谢反馈， 这个问题我们复现一下看看，  有尝试调整一下设备与路由器的距离，看看有改善么 ...

距离不超过30cm，网线也换过

吃不饱的185

和你一个网卡 不记得之前什么速率了 最近更新后发现只有100M速率  还是拉文件到本地发现的 蹲个解决的后续

吃不饱的185

飞牛技术同学 发表于 2025-3-26 19:12
感谢反馈， 这个问题我们复现一下看看，  有尝试调整一下设备与路由器的距离，看看有改善么 ...

其他帖子看到了 说是飞牛官网给的驱动不兼容 需要手动安装其他版本驱动 期待后续优化

jaxon

没有复现这个问题。可能是你接口松了，或者交换机问题，可用重试插拔试试

dragon3385

我也是同样的问题，能确定的是：发现百兆以后，重新按装完系统的时候是千兆，第二天回家一看就又变成百兆了。