近段时间经常在持续写入的时候掉盘

Zedly

设备环境：（物理机、局域网、系统0.9.27~29）

BUG现象：（两个机械硬盘在持续写入的时候，偶发掉盘（表现为空间损坏），经过“拔出硬盘线-删除空间-关机-插入硬盘线-开机-挂载”问题可以解决，昨日在进行多个大文件复制后，16T的HC550出现了掉盘。NAS物理机使用 850W ATX电源）

出现频率：（偶现）

联系方式：（飞牛私有云fnOS191，dddd）

日志文件：（Debug_Log_20250925220642，外链分享：飞牛分享【Debug_Log_20250925220642】，点击链接下载文件，App打开可转存到NAS：https://s.fnnas.net/s/16d62c475076403f81）

附件过大无法上传可以通过飞牛外链分享或者百度网盘提供日志文件

Zedly

Zedly

[Sat Sep 27 20:16:41 2025] ata5.00: configured for UDMA/133
[Sat Sep 27 20:20:12 2025] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sat Sep 27 20:20:12 2025] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Sat Sep 27 20:20:12 2025] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Sat Sep 27 20:20:12 2025] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Sat Sep 27 20:20:12 2025] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Sat Sep 27 20:20:12 2025] ata5.00: configured for UDMA/133
[Sat Sep 27 20:21:06 2025] ata5: limiting SATA link speed to 3.0 Gbps
[Sat Sep 27 20:21:07 2025] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[Sat Sep 27 20:21:07 2025] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Sat Sep 27 20:21:07 2025] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Sat Sep 27 20:21:07 2025] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[Sat Sep 27 20:21:07 2025] ata5.00: failed to IDENTIFY after ACPI commands
[Sat Sep 27 20:21:07 2025] ata5.00: revalidation failed (errno=-5)
[Sat Sep 27 20:21:12 2025] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[Sat Sep 27 20:21:12 2025] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Sat Sep 27 20:21:12 2025] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Sat Sep 27 20:21:12 2025] ata5.00: Read log 0x00 page 0x00 failed, Emask 0x100
[Sat Sep 27 20:21:12 2025] ata5.00: NCQ Send/Recv Log not supported
[Sat Sep 27 20:21:12 2025] ata5.00: Read log 0x00 page 0x00 failed, Emask 0x40
[Sat Sep 27 20:21:12 2025] ata5.00: ATA Identify Device Log not supported
[Sat Sep 27 20:21:12 2025] ata5.00: Read log 0x00 page 0x00 failed, Emask 0x40
[Sat Sep 27 20:21:12 2025] ata5.00: Read log 0x00 page 0x00 failed, Emask 0x40
[Sat Sep 27 20:21:12 2025] ata5.00: failed to set xfermode (err_mask=0x40)
[Sat Sep 27 20:21:12 2025] ata5: limiting SATA link speed to 1.5 Gbps
[Sat Sep 27 20:21:12 2025] ata5.00: limiting speed to UDMA/133:PIO3
[Sat Sep 27 20:21:19 2025] ata5: SATA link down (SStatus 1 SControl 310)
[Sat Sep 27 20:21:19 2025] ata5.00: disable device
[Sat Sep 27 20:21:19 2025] sd 4:0:0:0: rejecting I/O to offline device
[Sat Sep 27 20:21:19 2025] ata5.00: detaching (SCSI 4:0:0:0)
[Sat Sep 27 20:21:19 2025] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[Sat Sep 27 20:21:19 2025] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

飞牛技术同学

ata报错需要排查硬件的问题

Zedly

飞牛技术同学 发表于 2025-9-29 19:36
ata报错需要排查硬件的问题

有天在没有读写的时候也突然报错了，换了根sata线先试试